Konica Minolta 7033 Instruction Manual page 133

Section 8 : Special Copying : Page Editing
Procedure
z Set Insertions on Tray 1
Place the plain or coloured paper to be used for Insertions into Tray 1 (universal tray).
Advice
AMS function is automatically set.
If copy paper of the same size as that of originals is set on Tray 1, full-size copying is
effected.
If copy paper different in size from originals is set on Tray 1, an optimum magnification
is selected.
x Set Covers on Tray 1 or Multi-Sheet Bypass Tray
Place the plain or coloured paper that is to be used for Covers (front and back) into Tray
1 (universal tray) or into the Multi-sheet bypass tray.
When inserting thick paper as Covers, use the Multi-sheet bypass tray.
Load paper of the same size as that of the Insertions.
c Check Copy Paper: Trays 2, 3 and 4
Check that one of the trays (either Tray 2, 3, or 4) is also loaded with the same size paper
as the Cover or Insertions which have been placed in Tray 1 (universal tray).
Advice
If paper equal in size to that loaded into Tray 1 is also loaded into other trays, the copier
will automatically choose the paper tray with the smallest number located on the front
of the tray.
v Set Copying Conditions
1. Close the RADF securely and press the AUTO RESET button to set the RADF mode.
2. Press the APPLICATION button on the Operation panel to display the Application Selection
screen.
3. Touch "
Sheet/Cover Insertion " key on the Application Selection screen to display the
Sheet/Cover Insertion Mode Selection screen.
4. Touch the keys on the Sheet/Cover Insertion Mode Selection screen.
Application Selection screen
8 - 6
2. Sheet/Cover Insertion (continued)
Multi-sheet bypass tray: Covers
Tray 1: Insertions
or covers
Sheet/Cover Insertion Mode Selection screen