Konica Minolta 7033 Instruction Manual page 52

Section 6 : Basic Copying on Basic Screen
q Message area: Display the machine status and procedure required at that time.
w Icon area: Display the following icons.
Add toner icon
Displays when the toner supply becomes low. See p. 2-7 to p. 2-9.
Periodic maintenance icon
Displays when periodic maintenance is required. See p. 5-6.
Staple position icon
Displays the staple position when staple-sort mode is selected. See p. 10-5.
Finisher mode icon
Displays the finisher mode selected on the Output Selection screen.
Rotation icon
Displays when the Rotation function is activated.
Image quality icon
Displays the quality selected on the Image Quality screen. The icon is usually
displayed above the " QUALITY " key. See p. 7-18 to p. 7-22.
APPLICATION icon
Displays when any application function is selected on the Application Selection
screen. The icon is usually displayed above the " RESERVE " folder key. See p. 8-
2 to p. 8-3.
Job number icon
Displays the current output job number assigned to every job including reserve
jobs.
e " COPY MODE " key: Touch to display the Copy Mode screen and select the copy
mode (1s1, 1s2, 2s2, and 2s1). See p. 6-11 to p. 6-23.
r " COPY DENSITY " key: Touch to display the Density Adjustment screen and specify
the manual density or userset density.
t " LENS MODE " key: Touch to display the Lens Mode screen and specify 1.00 (full
size), Preset, Userset, Zoom, or Vertical/Horizontal zoom ratio.
y " PAPER SIZE " key: Touch to display the Tray Selection screen and select the desired
paper size or AMS.
u " SETTING " folder key: Selected when the screen displays basic copying functions.
Touch to return to Present copying job settings when making selection in Reserve
mode. When any trouble occurs during the Reserve mode, the " SETTING " folder key
changes to " JAM " or " ADD PAPER " according to the trouble type. The " SETTING " folder
key also changes to " INTERRUPT " when the copier is set for the Interrupt mode by
pressing the INTERRUPT button.
i " RESERVE " folder key: Touch to select copying conditions of subsequent job while
the copier is busy scanning or printing. See p. 7-11 to p. 7-17.
o " QUALITY " key: Touch when selecting the image quality (Normal, High or Very high).
! 0 " JOB LIST " key: Touch to view the reserve job of the machine, or release the reserve
job (see p. 7-15 to p. 7-16).
! 1 " SCAN " key: Touch to store the copy image (see p. 7-2 to p. 7-10).
! 2 Output quantity/Enter quantity display: Displays the print quantity entered with the
keypad, and the output quantity on the left side of the print quantity while the copier is
outputting the copied paper.
! 3 Memory indicator: Displays the rest of the memory available to be used in the operation
(see p. 7-2 to p. 7-10).
1. Basic Screen (continued)
6 - 3
Basic Screen