Sort Mode - Konica Minolta 7033 Instruction Manual

Section 10 : Output Mode

Sort Mode

The Sort mode is available when the offset-stacker Finisher is installed. Use this mode
when you want to output multiple copies of the original set, and have each set offset on
the Finisher middle/lower exit tray. The staple mode can be selected with the Sort mode.
Each copies set will offset in the stack tray.
Sort Mode Specifications
Using RADF
Exit tray
Paper size
Paper capacity
Advice
* : A5 size paper is available in horizontal feed (
Incompatible
Using Platen glass (available when used in combination with Image insert, Dual
Group
Image quality (Very high)
OHP interleave
3
2
1
3
2
1
3
2
1
3
2
1
(Platen glass is available when used in combination with Plate
store mode.)
: Middle (TRAY 2), Lower (TRAY 3) exit tray
: A3, B4, F4/8.5"x13", A4R, A4, B5R, B5, A5R*,8.5"x11"R,
8.5"x11"
: Paper cannot be discharged on upper exit tray.
Middle/Lower exit tray
500 sheets (A4R, A4, B5, B5R, 8.5"x11"R, 8.5"x11")
300 sheets (A3, B4, F4/8.5"x13", A5R*)
page, or Platen store mode)
1. Finisher Specifications (continued)
30mm
) only.
Finisher
10 - 5