Store Mode - Konica Minolta 7033 Instruction Manual

Section 7 : Other Basic Functions

1. Store Mode

Store mode allows you to scan multiple originals by touching " SCAN " key on the Basic
screen, and then output the complete set by pressing START PRINT button.
Store mode features two modes as described below.
• Platen store mode using platen glass to scan originals
• RADF store mode using RADF to scan originals
Using Store mode in Basic copying
Touch " SCAN " key to scan originals and store the data into memory, then press the
START PRINT button to start the output job.
Copying in 1s2 mode using platen glass always requires the Store mode.
The printing job will be collective in the following conditions as well as in the Store mode,
however, scanning and printing will be performed in succession simply by pressing the
START PRINT button. Although the RADF capacity is 50 sheets max., more originals can
be operated at a time by using Store mode in combination with the following conditions.
• 1s1 • 1s2
• 2s2 • 2s1
Using Store mode with Applications
Touch " Store Mode " key on the Application Selection screen to highlight it, then touch
" OK " key. Operate the same as above to scan and start printing.
Application Selection screen
7 - 2
Basic screen
Basic screen
1. Store Mode