Power Save [12] - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

13. Power Save [12]

Select the interval of time that must elapse before Auto Low Power and Auto Shut Off
become activated. Or, select the Auto Shut Off function to On or Off.
Setting options: See list below
Default settings: Auto low power; 15 min.
Auto shut off; 60 min.
Key Operator Mode screen 1
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password,
then touch " OK " to display the Key Operator Mode screen.
Advice
If an invalid Key operator password is entered, continue by entering the valid 4-digit
password.
2. To display menus
arrow key.
3. Touch "
12. Power Save " to display the Power Save Timer Setting screen.
4. The Timer Key is located on the Power Save Timer Setting screen below the Auto
Low Power indicator. Touch the Timer Key to select a specific waiting period before
activation of the Auto Low Power function. The default setting is 15min.
If the Auto Shut off function is not desired, proceed to step 6 .
If the "Auto Low Power" indicator light is dim and the Timer Key cannot be selected,
proceed to step 5 .
Advice
1 The period of time selected for Auto Low Power cannot exceed the Auto Shut Off
setting.
2 If the same period of time as Auto Shut Off is selected, the Auto Low Power indicator
light will dim, and Auto Shut Off will function instead of Auto Low Power.
Key Operator Mode screen 2
[11] to [15] of the Key Operator Mode screen, touch the
13. Power Save [12]
Power Save Timer Setting screen
Auto Shut Off ON/OFF screen
Lower
Key Operator
Mode
11 - 43