Konica Minolta 7033 Instruction Manual page 172

Section 8 : Special Copying : Page Editing
Incompatible
If any of the following copying conditions are going to be set, the Mixed original
mode may be cancelled or the key concerned on the screen may become faint, not
allowing setting.
E-sort
Staple-sort (with APS)
Image quality (Very high)
Reserve (with APS)
Sheet/Cover Insertion
Combination
Booklet
Procedure
z Set Copying Conditions
1. Close the RADF securely and press the AUTO RESET button to set the RADF mode.
2. Press the APPLICATION button on the Operation panel to display the Application
Selection screen.
3. Touch "
Mixed Original " key on the Application Selection screen. The " Mixed Original "
key will be reversed, and the incompatible function keys will be dimmed to show
inactivity.
Advice
To return to the initial state, touch "
4. As required, set the other copying conditions. When copying more than 50 originals,
use RADF store mode or Platen store mode. Touch " Store Mode " key to highlight it.
Advice
To clear all application settings, touch "
restored.
5. Touch "
OK " key on the Application Selection screen. The Basic screen will be restored.
OHP interleave
Image insert
Dual page
Repeat
Auto layout
Image shift
Non image area erase
Application Selection Screen
CANCEL " key. The Basic screen will be restored.
ALL CLEAR
9. Mixed Original (continued)
" key. The Basic screen will be
Mixed Original
8 - 45