Konica Minolta 7033 Instruction Manual page 110

Section 7 : Other Basic Copying
x Place Original(s)... RADF: Original FACE UP
1. Place the original into RADF or onto the Platen glass.
Advice
For details of how to place the original, see p. 6-8.
2. Scan the originals, as required.
c Display Check Screen
Press the CHECK button on the operation panel to display the Check screen. Verify
the settings made for the current job. For details of the Check mode items, see p. 7-
22 to p. 7-27.
To change any settings before operating Proof copy, proceed to v.
To operate Proof copy, proceed to step 2. in b.
To start printing immediately, proceed to ..
Operation panel
v Change Settings before Proof Copy
1. Touch "
EXIT " to exit from the Check mode and return the Basic screen.
2. Change the copying conditions, as required.
3. Return to the Basic screen.
Please Be Reminded!
DO NOT press the STOP/CLEAR button when changing the print quantity. Stored
image will be cleared. Do not press the AUTO RESET button as this will clear all the
copier settings.
To operate Proof copy, proceed to step 2. in b.
To start printing immediately, proceed to ..
Platen Glass: Original FACE DOWN
DATA
CHECK HELP
1
MODE
4
APPLICATION
7
JOB MEMORY
P
AUTO RESET
4. CHECK Button (continued)
Check screen
CHECK Button
7 - 23