Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Konica Minolta 7075
Summary of Contents for Konica Minolta 7075
- Page 1 7075 INSTRUCTION MANUAL...
- Page 2 ® Program NERGY The Energy Star Program has been established to encourage the wide- spread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. With its automatic energy saving features Auto Low Power and Auto Shutoff (see item 6.3 Power Saver Mode) and the automatic duplex function, this product meets the Energy Star guidelines for energy efficiency.
- Page 3 What KONICA 7075 has to offer: Highly Productive Konica 7075 produces 75 A4 copies or 44 A3 copies per minute. The integrated direct duplexing process enables automatic double-sided copy- ing. Double-sided originals are automatically reversed in the RADF. Digital Image Memory Konica 7075 works digitally: Originals are initially scanned into the image memory, then the requested quantity is printed.
-
Page 4: Table Of Contents
2. Main Components of Konica 7075 ........ - Page 5 14. Technical Specifications Konica 7075 ........
-
Page 6: Advice On Installation And User Safety
1. Advice on Installation and User Safety This section contains important information on the safe installation and use of the Konica 7075. In the interest of your own safety and to ensure an optimum functionality of your new equipment, we advise you to read the following precautions carefully. -
Page 7: Installation
1. Advice on Installation and User Safety 1.2 Installation An inadequate location of the system can lead to a loss in copy quality and can even damage the equipment. The following should therefore be considered before installing the unit. 1. The location of the equipment must be level and must not be subject to vibration (please refer also to 1.3 Installation Space on page 8). -
Page 8: Installation Space
1. Advice on Installation and User Safety 1.3 Installation Space Basic System 1603 1203 1762 1845 System with Finisher (FS-108)* and Large Capacity Tray (LT-401)* 1603 1203 1858 2344... - Page 9 1. Advice on Installation and User Safety System with Booklet Maker (FS-108BM)*, Trimmer (TU-108)* and Large Capacity Tray (LT-411)* 1117 1603 1203 2660 3430 All dimensions in mm.
-
Page 10: Main Components Of Konica 7075
2. Main Components of Konica 7075 External: Control Panel Original Insertion in RADF LCD Touch Screen Work Table Power Switch Multi-Sheet Bypass Tray for 150 Sheets A5R to A3+ Finisher (FS-108)* Front Door Tray 1: Universal Tray for Left Door... - Page 11 2. Main Components of Konica 7075 Internal: Toner Bottle Toner Unit Fixing Unit Drum Unit Booklet Maker (FS-108BM)* Important: Do not place heavy objects on the trimmer stak- ker or apply any weight on it, and do not use it Trimmer Stacker Cover: for storage.
-
Page 12: All Functions At A Glance
3. All Functions at a Glance 3.1 The Display Keys User Instructions These icons appear, if the following functions are active: Scanner/Document Server 600 dpi Screens appearing on the LCD show detailed user instructions and corres- ponding operation steps. High Resolution The selected copy quantity and the number of processed copies are dis- Rotation... -
Page 13: The Operation Panel
3. All Functions at a Glance COPY TIMER SCANNER/SERVER PRINTER INTERRUPT POWER SAVER ON/OFF PROOF COPY CHECK HELP STOP JOB MEMORY AUTO RESET COUNTER CLEAR QTY. START 3.2 The Operation Panel Mode Job Memory Switches between Copier, Activates the screen for selecting job COPIE SCANNER / SERVER Document Server and Printer. -
Page 14: The Interactive Touch Screen
3. All Functions at a Glance 3.3 The Interactive Touch Screen The interactive touch screen serves to enter all software selections, which are then shown in the display. Functions are selected with the soft keys. Selections are shown automati- cally resp. after calling up the check screen. Soft keys, which can be activated in the LCD, show a dark shadow under- neath and on the right edge of the key. -
Page 15: The Original Scanning Condition Screen
3. All Functions at a Glance 3.3.2 The Original Scanning Condition Screen The SPECIAL ORIGINAL key activates this screen, which enables various adjustments related to the original quality, as well as the selection of functions to process special originals. Under IMAGE QUALITY, the resolution can be changed for difficult originals from the standard setting to High mode, Very High mode (equivalent to 256 grayscales), or 600 dpi. - Page 16 3. All Functions at a Glance Image Insert To insert an original from the platen glas into a document set copied via the RADF (p. 48). Combination To combine from 2 to 8 originals on one copy (p. 49). Dual Page To copy from books, magazines etc.
-
Page 17: Help Mode
4. Help Mode 4.1 The Help Key CHECK HELP The HELP hard key calls up varied help information. General information regarding the function is available, as well as detailed user instructions, explaining the operation procedures step by step. There are two ways to call up the required information: 1. -
Page 18: Automatic Help Mode
If there is a problem, copying will be interrupted and a help information is displayed on the screen. If the service icon is displayed, please inform your key operator or the Konica service. If the problem is a paper jam, please follow exactly the instructions dis- played on the screen. -
Page 19: How To Supply Paper, Toner, Staples
5.1 Supply Paper General This Konica system is equipped with up to 4 paper trays and a multi-sheet bypass. Each tray selection key in the basic screen displays the filling level of the corresponding tray. If a tray is nearly empty the filling level indicator will flash. -
Page 20: Supply Toner
5. How to Supply Paper, Toner, Staples 5.2 Supply Toner If the toner runs low, a warning message appears in the LCD. Important: Toner should be kept out of reach of children. If toner is inhaled, swal- lowed or gets into contact with the eyes, consult your doctor. How to supply toner: 1. -
Page 21: Supply Staples
5.3 Supply Staples If the staple cartridge is empty, a warning message appears. Please only use original Konica staple cartridges as a refill! 1. Open the finisher door and pull out the stacker unit by its handle. 2. Release the cartridge housing by pulling it upwards slightly, then for-... - Page 22 5. How to Supply Paper, Toner, Staples 3. Now lift the cartridge housing from its holder as shown. 4. Remove the empty staple cartridge from the cartridge housing. Insert a new staple cartridge so that the two arrows are aligned. 5.
-
Page 23: Before Copying
6.1 Weekly Timer The timer indicator is lit, if the weekly timer is activated in the Konica 7075. In this case, please do not switch the unit on and off at the main power switch; the machine turns on and off automatically. -
Page 24: Power Saver Mode
Auto Shut-Off Mode after a delay of 30 minutes or more after copying. There is a certain warm-up time, if the copier is activated again from this mode. – To switch 7075 on again, press any key except the Power Saver or Start key. Power Saver Key –... -
Page 25: Simple Copying
7. Simple Copying This section deals with the functions needed for simple, straightforward copying jobs. Some features and functions of this system cannot be activated simulta- neously. The table after page 66 shows, which functions are compatible. 7.1 Automatic Copying COPIE SCANNER / SERVER PRINTER... -
Page 26: Position Originals
7. Simple Copying 7.2 Position Originals Insert Originals into RADF Originals in sizes A3 to A5R are processed automatically. Double-sided originals can be reversed automatically. Up to 100 originals can be inserted into the RADF at one time (for documents of more than 100 originals, see 7.3 Store Mode). -
Page 27: Basic Functions
7. Simple Copying 7.4 Basic Functions The basic functions are selected in the basic screen. User instructions appear in the dark area at the top. The present selections made to the basic functions are displayed in the lower screen area. The soft keys are pressed to select the functions. -
Page 28: Magnification: Reduce & Enlarge / Zoom / Vertical/Horizontal/Zoom
7. Simple Copying 7.4.3 Magnification: Reduce & Enlarge / Zoom / Vertical/Horizontal Zoom You have various options to adjust the magnification ratio: – Press the 1.00 key, if you want to copy same size. AMS, automatic magnification selection is switched off. To switch on again, press the corresponding key. -
Page 29: Paper Size Selection
7. Simple Copying 7.4.4 Paper Size Selection – In this screen, simply press on the desired paper size. Your originals will then automatically be reduced or enlarged onto the selected copy size (AMS). – If you press APS, the copier looks for the size corresponding to the original size. -
Page 30: Basic Finishing Functions
7. Simple Copying 7.5 Basic Finishing Functions Unit with Finisher*: Selections for sort and stapling functions are directly made in the Basic Screen by pressing the SORT and STAPLE SORT keys. The selected out- put mode is displayed in the screen. Sort One complete set of copies after the other exits into the main tray –... - Page 31 7. Simple Copying Unit without Finisher*: If no Finisher* is installed, copies will exit face down in sets, and will be stacked witout separation. The following finishing functions are available: Sort – Press the SORT key on the Basic Screen to activate the electronic sort function.
-
Page 33: Other Basic Functions
8. Other Basic Functions This section provides instructions for all other basic copying functions, which are available in this system. 8.1 Special Originals: Adjust Original Scanning Conditions Press the SPECIAL ORIGINAL key to call up the display shown above. This is where various adjustments, relating to the type and quality of your originals, can be made in order to ensure an optimum reproduction. -
Page 34: Original Type: Mixed Originals / Z-Folded Original / Sdf
8. Other Basic Functions 8.1.3 Original Type: Mixed Originals / Z-Folded Original / SDF Originals of various sizes can be processed automatically from the stack. Or the RADF is adjusted to handle A3 originals that have been folded with special care. And thicker originals can be processed via the SDF. Mixed Originals Originals of the following different sizes can be positioned in the RADF as a stack:... -
Page 35: Special Original Size
8. Other Basic Functions 8.1.4 Special Original Size Press the Non STD size key to access the screen shown above. Here you Advice: can specify the scanning area for originals of particular sizes: Select Tabpaper to copy tab- Always select a slightly lager size than your original. If you select WHOLE bed originals onto tabbed sets, AREA, the complete area of the platen glass is scanned and is copied including the tab information. -
Page 36: Job Pre-Programming / Reserve Mode
8. Other Basic Functions 8.3 Job Pre-Programming / Reserve Mode While a copy job is being processed, you can already enter all settings for up to four further copy jobs and scan the originals. Job settings that are stored in the Job Memory cannot be recalled in the Reserve mode. –... -
Page 37: Copy Interrupt
8. Other Basic Functions The NON COMPLETE JOB LIST key displays a list of the next five print and copy jobs to be processed. This list also displays the names of users having sent the print jobs. To return to the Basic Screen, press OK. The following indications are displayed in the Status Screen: Mode: Copier... -
Page 38: Job Memory
8. Other Basic Functions 8.6 Job Memory This Konica system allows to save all settings for frequently needed jobs once, and to recall them whenever needed. – The settings for 30 jobs can be saved. (The key operator can lock saved jobs to protect them against inadvertent deletion.) -
Page 39: Recall Job Settings
8. Other Basic Functions 8.6.2 Recall Job Settings – On the operating panel, press the JOB MEMORY key. – Select the desired job by pressing the job number. If necessary, use the arrow key to display the required job memory key on the screen. Confirm your selection with OK;... -
Page 41: Special Functions
9. Special Functions This section deals with the system’s special functions and explains how they are operated. How to Select Special Functions: – Pressing the APPLICATION key in the Basic Screen calls up the Application Selection Screen. – To activate a function, simply press the corresponding soft key. –... -
Page 42: Image Editing Functions
9. Special Functions 9.1 Image Editing Functions The following functions allow the editing of the original, so that the copy will show a changed image. You can for example shift the image, repeat a portion of the image, and so on. 9.1.1 Non-Image Area Erase Dark areas around the original are automatically erased. -
Page 43: All Image Area
9. Special Functions 9.1.4 All Image Area Originals are copied completely to the edges to avoid image loss. 7075 7075 7075 Original Normal All Image Copie Copie 9.1.5 Image Repeat This function lets you fill the copy with repeated small motifs or a defined portion of an original. -
Page 44: Image Shift / Reduce And Shift
9. Special Functions 9.1.6 Image Shift / Reduce and Shift With this function you can shift the image into all directions by up to 250 mm, e.g. to create a filing margin. Or you shift and reduce the image at the same time, so that no portion of the image is lost at the opposite edge. -
Page 45: Frame/Fold Erasure
9. Special Functions 9.1.7 Frame/Fold Erasure This function helps to avoid dark shadows, which appear when copying 3-dimensional originals, e.g. books. You can specify a frame erasure width between 1 and 15 mm and a fold erasure width between 1 and 30 mm. –... -
Page 46: Stamp
9. Special Functions 9.1.8 Stamp / Overlay This function allows to print various letters at a fixed or specified position onto the copy. Some but not all prints can be used in multiple combina- tions. In the Overlay Mode it is possible e.g. to repeat a previously scan- ned motif on every page. - Page 47 9. Special Functions – Press the corresponding function key for the desired print, e.g. STAMP. Select the desired wording (for Stamp* and Watermark*) or a format for the print (for Date/Time, Set Numbering, Page Numbering and Watermark Numbering). – Under PRINTING POSITION on the right side of the screen you can specify where the print should be positioned on the page (except for watermarks, which are automatically printed in a fixed position).
-
Page 48: Copy Editing Functions
9. Special Functions 9.2 Copy Editing Functions Use the functions described in this section to determine how copies or copied sets should be completed, i.e. as a booklet or with each chapter beginning on a right (front) page, etc. 9.2.1 Sheet / Cover Insertion Copied sets can be individually completed with front and back covers and inserted sheets. -
Page 49: Ohp-Interleave
9. Special Functions 9.2.2 OHP-Interleave This function allows copying onto OHP films with automatic insertion of blank or copied sheets into the set of transparancies. OHP Films with Blank Interleaves Each original is copied onto an OHP film. Blank interleaves and copied OHP films exit alternatingly. -
Page 50: Chapter
9. Special Functions 9.2.3 Chapter When duplex copying, you can use this function to start each new chap- ter on a right (front) page. Up to 30 positions can be specified for chapter beginnings with page numbers up to 250. This function is only available in combination with duplex coping 1 3 2 or 2 3 2. -
Page 51: Combination
9. Special Functions – Select the function; and use the keypad to enter the page numbers, after which the images are to be inserted. If several inserts should fol- Originals Images low after the same page number, enter that number as many times, i.e. once for every insert. -
Page 52: Dual Page / Book Copy
9. Special Functions 9.2.6 Dual Page / Book Copy Use this function to automatically copy the left and right page of an open book onto two separate A4 sheets or onto the front and back of one A4 sheet. The front and back cover can be included, and the booklet mode also selected. -
Page 53: Booklet
– 1 3 2 is automatically selected. For double-sided originals, you have to change this to 2 3 2. – If the Konica 7075 is equipped with the Booklet Maker*, you can select automatic finishing of your booklets with centerfold and stapling (refer to section 10. -
Page 54: Program Job
9. Special Functions 9.2.8 Program Job This function enables you to make different function selections for various parts of your original, and then output them all as a complete set. You may combine e.g. one-sided and double-sided copies as well as paper fed 1 Original Set Copies from different trays in one document. -
Page 55: Finishing Options
10. Finishing Options If the system is equipped with the Finisher* or the Booklet Maker*, a variety of automatic finishing functions is available, such as the booklet stapling function. This section contains instructions for these special output functions. Simple Sorting and Stapling is explained under item 7.5 Basic Finishing Functions. -
Page 56: Cover Sheet Insertion (Using Post Inserter*)
10. Finishing Options 10.3 Cover Sheet Insertion (using Post Inserter*) If the system is equipped with the optional Post Inserter (PI-108)*, it is Advice: possible to compile copied sets and booklets automatically with covers of If you want to add a cover sheet up to 200g/m . -
Page 57: Scanner / Document
11. Scanner / Document Server* If your Konica system has the optional HDD* installed, you can store documents permanently or temporarily (depending on the settings made by the key operator) on the HDD and recall them from the HDD. (The functions of scanning into the network and image editing in the HDD are not yet available even though already provided on the screen.) -
Page 58: Image Store & Output
11. Scanner / Document Server* – If you want to delete the data of a job, use the arrow keys on the right side of the job name list to highlight the name of the job to be deleted; then press JOB DELETE. A popup menu will appear for you to confirm that you want to delete the selected data. -
Page 59: Image Recall Mode
11. Scanner / Document Server* – To suspend the current job, press STOP. A popup menu will be displayed to ask you how to complete the current job: – Press CONTINUE to continue printing the job and to store the data on the HDD. - Page 60 11. Scanner / Document Server* – A list appears showing all data/jobs stored under the previously entered password. Press the desired job name key. Now use the arrow key poin- ting to the right to move the job to the recall list on the right. –...
-
Page 61: Troubleshooting
12. Troubleshooting 12.1 Selfdiagnostic System This copier is equipped with an integrated selfdiagnostic system. A variety of information and data is easily recalled, e.g. a reading of the total copy counter (see below). Detailed information regarding any type of problem is automatically displayed on the screen. -
Page 62: Memory Overflow
Konica service anyway, quoting the corresponding error code. – Note down the error code and the telephone number of the Konica service. – Switch the system off and unplug it from the socket. – Call the Konica service, and report the error code. -
Page 63: Paper Jam
12. Troubleshooting 12.5 Paper Jam Paper Jam Position Screen If a paper jam occurs, the touch screen will automatically display an illustration with all jam positions and instructions how to clear the jam. Pressing the corresponding key calls up step-by-step operating instruc- tions and more detailed graphical displays. -
Page 64: Solving Simple Problems
– Is the copy paper damp? – Insert dry copy paper. – Is the service call screen displayed? – Call the Konica service. After a paper jam has been – Can you find other paper jams – Try to clear all paper jams that you... - Page 65 12. Troubleshooting Problem Check Possible Solution Copies are reduced or – Is AMS active? – If a paper tray was selected in the enlarged, even though the Paper Size screen, AMS is active. full size ratio 1:1 has been Select APS or press the 1.00 selected.
-
Page 66: Daily Care
One precondition for a good copy quality is a clean platen glass! We sug- gest to clean the platen glass and the underside of the document feeder daily with a clean soft, possibly damp cloth or the special Konica cleaning liquid. -
Page 67: Function Combinations
14. Technical Specifications Konica 7075 Typ: Console type with fixed platen glass Transfer Process: Indirect electrostatic laser method, OPC drum; dry, 2-component magnetic brush. Light Source: Xenon lamp, 280 W Image Memory: 64 MB standard, 512 MB max. Copy Speed: 75 A4 or 44 A3 copies / minute First A4 copy after 3.9 seconds... -
Page 68: Function Combinations
13. Function Combinations • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •... - Page 69 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •...
-
Page 70: Optional Accessories
Large Capacity Tray (Tray 4, either LT-401 or LT-411) Capacity: 4,000 sheets Paper Sizes: LT-401 A4 LT-411 A3, B4, A4, A4R; adjustable by the Konica service HD-102 Functions: Various stamps, watermarks; extension of the system as document server Extension to Image Memory... - Page 73 If a problem occurs: Open this page and place manual on the unit.
- Page 74 U N I T E D K I N G D O M KONICA BUSINESS MACHINES EUROPE GMBH, LILIENTHALSTRASSE 1, D-21337 LÜNEBURG (GERMANY), TEL. (0 41 31) 8 86 - 0, FAX (0 41 31) 8 86 - 2 99...