Konica Minolta 7033 Instruction Manual page 271

Section 11 : Key Operator Mode
(4) Touch OFF to enter the OFF time.
Enter a 2-digit OFF-hour (ex. 6 p.m. is 18) and a 2-digit OFF-minute using the
keypad on the operation panel.
Advice
1 If ON-time and OFF-time are the same, power will not go on.
2 Be sure to enter both ON-time and OFF time.
(5) Touch " OK " to complete settings and return to the W.T. ON/OFF Time Setting
screen.
(6) Confirm the ON-time and OFF-time on the W.T. ON/OFF Time Setting screen.
5. Use the procedure below to delete the ON-time and OFF-time of the day of the
week.
(1) Touch the
week to be deleted.
(2) Touch " DEL. ".
(3) On-time and OFF-time of the day of the week are deleted and "—:—" are
displayed.
Advice
On the day of the week with the ON/OFF-time deleted, you can not turn on the power.
6. If no further changes are required, proceed to step 9 .
7. If other Weekly timer settings are required, touch "
Timer Setting Menu screen. Select another desired menu item, from [1] ~ [5] .
8. If no other Weekly timer settings are required, touch "
Operator Mode screen.
9. Turn power OFF.
10. Turn the copier power switch back ON to perform copying operations.
11 - 36
Upper arrow and Lower arrow keys to select the day of the
10. Weekly Timer [9] (continued)
RETURN " to return to the Weekly
RETURN " to restore the Key