Manual Shut-Off; Automatic Shut-Off - Konica Minolta 7033 Instruction Manual

Section 5 : Copier Management

Manual Shut-Off

Press the POWER SAVER ON/OFF button.
The lamp of the POWER SAVER ON/OFF button lights, other
indicators are all turned off, and the LCD goes off.
Advice
When the Paper Jam Processing screen or the screen to
wait for restarting copying is displayed, the Power Saver
will not work.
Release of Manual Shut-Off
Press the POWER SAVER ON/OFF button again. The Shut-off
will be released. The lamp of the POWER SAVER ON/OFF
button is turned off and the LCD will restore its ordinary
brightness.

Automatic Shut-Off

If a certain period of time has passed after the last copy job was completed, and the copier
is kept in "ready for copying mode", the power will be automatically turned off if this function
is selected. This function is initially set to 60 minutes.
The automatic shut-off function can be set to "OFF" by the Key operator. The time to be
selected for this function can be selected from 30 minutes, 60 minutes, 90 minutes, 120
minutes, and 240 minutes by the Key operator. See p. 11-43 ~ p. 11-44.
Advice - Auto Low Power and Auto Shut-Off
When the Auto Low Power function operates before the Auto Shut-Off function starts
operating, a copier turns to the Shut-Off state after a certain period of the Auto Low
Power state is passed.
Release of Automatic Shut-Off
Press the POWER SAVER ON/OFF button.
1. Power Saver (continued)
TIMER
ERROR
POWER SAVER
ON / OFF
3
INTERRUPT
6
STOP / CLEAR
9
5 - 3
Power Saver