Frame/Fold Erasure - Konica Minolta 7033 Instruction Manual

Section 9 : Special Copying: Copy Image

4. Frame/Fold Erasure

If a thick original like a book is placed on the Platen glass and copied, sometimes it can
happen that the copy will be shaded at the edge and down the center. If the Frame/Fold
erasure function is used the shaded portion around the copied image and down the centre
can be erased, to prevent excessive toner consumption.
General copying
Basic rules for Frame/Fold Erasure copying
• The original is placed onto the RADF or on the platen glass.
Frame/Fold Erasure Specifications
Frame erasure width : 1 mm to 15 mm in 1 mm increments
Frame original size
Frame copy paper size : A3, B4, A4R, A4, B5R, B5, A5R*, 8.5"x11"R (80g/m
Fold erasure width
Fold original size
Fold copy paper size : A3, B4, A4R, B5R, A5R*, 8.5"x11"R
Print quantity
Advice
*: A5 is available in horizontal feed (
Incompatible with Frame erasure
Combination
Repeat
Incompatible with Fold erasure
Combination
Booklet
Dual page
Mixed original
Repeat
Place original
Frame Erasure
copying
default setting; 5 mm
: A3, B4, A4R, A4, B5R, B5, A5R, 8.5"x11"
paper recommended)
: 1 mm to 30 mm in 1 mm increments
default setting; 10 mm
: A3, B4, A4R, B5R, 8.5"x11"R
: 999 sheets max.
Frame
erasure
Frame Fold
erasure erasure
Fold Erasure
copying
) only.
4. Frame/Fold Erasure
Frame
erasure
Frame
erasure
Frame/Fold Erasure
copying
2
9 - 15
Repeat
Frame/Fold
Erasure