Konica Minolta 7033 Instruction Manual page 130

Section 8 : Special Copying : Page Editing
• When the Basic screen is restored with an application function selected, the green lamp
of the APPLICATION button lights to show that an application function has been selected.
To check the copying conditions currently selected, press the CHECK button on the
Operation panel to display the Check screen. (See p. 7-22 to p. 7-27.)
Operation panel
CHECK
Advice: APPLICATION icon
This copier is initially set to display the icon "
of the screen, when the display returns to the Basic screen after setting any application
function on the Application Selection screen.
Please contact your Service Centre, if you do not want to activate the icon.
Advice - Help Screens for Application Functions
• When the Application Selection screen is displayed with none of the keys reversed,
press the HELP button on the Operation panel. The screen briefly describing
application functions will be displayed.
• If the HELP button on the Operation panel is pressed with the Application Selection
screen displayed after any one of the keys has been touched and reversed, the
screen describing the function of the touched key will be displayed.
• After completion of the copying using an application function, press the APPLICATION
button on the Operation panel to display the Application Selection screen, then
press the HELP button. The screen describing how to cancel the application function
will be displayed.
Touch " " key to restore the Application Selection screen.
EXIT
DATA
HELP
1
MODE
4
APPLICATION
7
JOB MEMORY
P
AUTO RESET
Basic screen
1. Application Selection Screen (continued)
Check screen
" in the lower message area
Application
Selection Screen
8 - 3