Copying Using Memory; C Opying Using Memory; To Scan Originals Into Memory (Store Mode) - Konica Minolta 7085 Instruction Manual

Copying Using Memory

This section describes various copying features available on this machine using built-in
memory.

To Scan Originals into Memory (Store Mode)

Store mode allows you to scan all the originals first, then to start a continuous printing
job.
Use RADF store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the document feeder
due to thickness, size or condition.
RADF tray capacity is 100; however, more than 100 originals can be
scanned into memory using RADF store mode.
>>>Specification for Store Mode<<<
❒ Incompatible with RADF store mode: Image Insert, Dual Page, Storing image in
Overlay Memory
❒ Incompatible with Platen store mode: Storing image in Overlay Memory
1.
Make copying selections, as desired.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch STORE on the Basic Screen to highlight it.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
3-32
DETAILS
Reminder!
HINT