Konica Minolta 7033 Instruction Manual page 178

Section 9 : Special Copying: Copy Image
Procedure
z Set Copying Conditions
1. Close the RADF securely and press the AUTO RESET button to set the RADF mode.
2. Press the APPLICATION button on the Operation panel to display the Application
Selection screen.
3. Touch "
Text/Photo Enhance " key on the Application Selection screen. The Text/
Photo Enhance screen will be displayed.
Application Selection screen
4. Touch and reverse either of the "
5. Touch "
OK " key to return to the Application Selection screen.
Advice
To void the selection, touch "
6. As required, set the other copying conditions. When using Store mode, touch "
Mode " key on the Applicarion Selection screen.
Advice
To clear all the application settings, touch "
restored.
7. Touch "
OK " key on the Application Selection screen. The Basic screen will be restored.
x Enter Print Quantity
Press the Ten keys to set the desired print quantity.
To change the entered quantity, press the CLEAR QTY. button and enter the correct
number.
Please Be Reminded!
DO NOT press the STOP/CLEAR button when changing the print quantity. Stored
image will be cleared. Do not press the AUTO RESET button as this will clear all the
copier settings.
Operation panel
ELP
ON
ORY
ET
PHOTO ", " TEXT ", or " INCREASE CONTRAST " key.
CANCEL
DATA ERROR
POWE
ON
1 2 3
INTE
4 5 6
STOP
7 8 9
0
P
CLEAR QTY. STAR
1. Text/Photo Enhance (continued)
Text/Photo Enhance screen
" key. The Basic screen will be restored.
ALL CLEAR " key. The Basic screen will be
Basic screen
Store
Text/Photo
Enhance
9 - 3