Konica Minolta 7033 Instruction Manual page 281

Section 11 : Key Operator Mode
Key Operator Mode screen 1
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password
and touch " OK " to display the Key Operator Mode screen.
Advice
If an invalid Key operator password is entered, continue by entering the valid 4-digit
password.
2. To display menus
arrow key.
3. Touch "
13. Memory SW " to display the Memory Switch screen. The Memory Switch
screen can be scrolled to the third screen.
4. Use the procedure below to select the desired item and change the setting.
(1) Touch Upper arrow and
Switch screen to scroll the screen.
(2) Touch Upper arrow and
Switch screen to highlight the desired item.
(3) Touch " EDIT " to change the setting of the highlighted item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
5. If no further changes are required, proceed to step 7 .
6. If other key operator setting are required, touch "
Mode screen.
7. Turn power OFF.
8. Turn the copier power switch back ON to perform copying operations.
11 - 46
Key Operator Mode screen 2
Memory Switch screen 2
[11] to [ 15] of the Key Operator Mode screen, touch the
Lower arrow keys at the right on the Memory
Lower arrow keys at the lower left on the Memory
14. Memory Switch [13] (continued)
Memory Switch screen 1
Memory Switch screen 3
RETURN " to restore the Key Operator
Lower