Section 5 : Copier Management
5. Daily Maintenance
In order to maintain optimum copy quality, always keep areas below clean.
Clean the Platen Glass
Use a clean, soft cloth to wipe dirt or marks from the glass
surface. If it is difficult to clean, use a slightly damp cloth.
Please Be Reminded!
Never use benzene, thinner or any other volatile liquid to
clean them.
Clean the Left Partition Glass
The glass partition at the far left of the platen glass should be
kept clean; otherwise soiled marks may be copied, resulting in
dark lines on the copies.
Clean the slit glass with a clean soft cloth.
Clean the RADF Platen Guide Cover
The RADF platen guide cover should be kept clean; otherwise
soiled marks may be copied or document sizes may not be
detected correctly.
Wipe with a clean, soft cloth.
Please Be Reminded!
Never use benzene, thinner or any other volatile liquid to
clean them.
5 - 8
5. Daily Maintenance