Konica Minolta 7033 Instruction Manual page 204

Section 9 : Special Copying: Copy Image
3. Press the APPLICATION button on the Operation panel. The Application Selection
screen will be displayed.
4. Touch "
Image Shift " key on the Application Selection screen. The Image Shift Mode
Selection screen will be displayed.
Application Selection screen
5. To select the Image shift:
(1) Touch " Image Shift " key.
(2) Touch the
select the desired shift amount of the front page.
Selecting the amount between 0 mm and 250 mm will create the left binding
margin.
Selecting the amount between –250 mm and 0 mm will create the right binding
margin.
(3) Touch the upper or lower arrow key next to AMOUNT (BACK) to select the desired
shift amount of the back page.
Selecting the amount between 0 mm and 250 mm will create the left binding
margin.
Selecting the amount between –250 mm and 0 mm will create the right binding
margin.
Advice
Select carefully the front and back margins according to the copy mode selected in
2
step .
Advice
To void the selection, touch "
restored.
Upper arrow or Lower arrow key next to AMOUNT (FRONT) to
" key. The Application Selection screen will be
CANCEL
7. Image Shift (continued)
Image Shift Mode Selection screen
Image Shift Mode Selection screen
Image Shift
9 - 29