Copying Using Memory; C Opying Using Memory; To Scan Originals Into Memory (Store Mode) - Konica Minolta 7022 Instruction Manual

Copying Using Memory

This section describes various copying features available on this machine using its
built-in memory.

To Scan Originals into Memory (Store Mode)

Store mode allows you to scan all the originals first, then to start a continuous printing
job.
Use RADF store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the document feeder
due to thickness, size or condition.
RADF tray capacity is 50; however, more than 50 originals can be scanned
into memory using RADF store mode.
>>>Specification for Store Mode<<<
❒ Incompatible with RADF store mode: Image Insert, Dual Page
❒ Incompatible with Platen store mode: None
1.
Make copying selections, as desired.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Press [APPLICATION] on the control panel.
The Application Selection Screen will be displayed.
3.
Touch Store Mode to highlight it.
You may find the key already highlighted due to the copying selections made.
3-22
DETAILS
Reminder!
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
DATA
FAX
1 2 3
INTERRU
4 5 6
7 8 9
0
STAR
CLEAR QTY.