Konica Minolta 7033 Instruction Manual page 164

Section 8 : Special Copying : Page Editing
9. Touch the "
SCAN " key on the Basic screen.
"Place images for insertion on the Platen glass" and "SCAN key : Scan START key
: Start" massages are displayed alternately.
10. Repeat steps 6. to 9. until all the originals are scanned.
Advice
After scanning the original, the magnification ratio can be changed before pressing the
START PRINT button for printing all the page collectively.
Having Problems?
The memory may be fully loaded to cause overflow during scanning. See p. 12-4 to p.
12-5.
v Start Copying
Press the START PRINT button. All scanned images are
copied in succession.
To stop copying, press the STOP/CLEAR button. Scanned
data in the memory will be cleared.
After completion of copying, all the data in the memory will
be cleared.
Basic screen
7. Image Insert (continued)
ERROR
POWER SAVER
ON / OFF
2 3
INTERRUPT
5 6
STOP / CLEAR
8 9
0
CLEAR QTY. START PRINT
8 - 37
Image Insert