Lock Job Memory [5] - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

6. Lock Job Memory [5]

Use this function to lock/unlock or delete a Job that has been programmed.
A locked Job is indicated by a lock icon on the job number of the Job Selection screen.
The settings of a locked job cannot be changed.
Setting options: Lock Job memory; Unlock Job memory; Delete Job memory
Lock/delete is available for all 15 stored jobs
Job lock is available only for named jobs
A blank key indicates that no job is programmed
* * * * * * indicates that a job is programmed but unnamed
Key Operator Mode screen
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password,
then touch " OK " to display the Key Operator Mode screen.
Advoce
If an invalid key operator password is entered, continue by entering the valid 4-digit
password.
2. Touch "
5. Lock Job memory " to display the Job Memory Lock/Delete screen.
3. To lock or unlock a job memory, operate the procedure below, then proceed to step
5 .
(1) Touch Upper arrow or
Lock/Delete screen to highlight the job to be locked/unlocked.
(2) Touch " Job Lock ".
(3) The job to be locked will display the lock icon in the job number. The previously
locked job will be unlocked and the lock icon will disappear.
4. To delete a job memory, operate the procedure below, then proceed to step 5 .
(1) Touch Upper arrow or
Lock/Delete screen to highlight the job to be deleted.
(2) Touch " DEL ".
(3) Programs and name are deleted from the job memory.
5. Touch "
RETURN " to complete the setting and return to the Key Operator Mode
screen.
6. Turn power OFF.
7. Turn the copier power switch back ON to perform copying operations.
11 - 28
Job Memory Lock/Delete screen
Lower arrow key on the right in the Job Memory
Lower arrow key on the right in the Job Memory
6. Lock Job Memory [5]