Copy Limit Reached Effect [5] - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

Copy Limit Reached Effect [5]

Use this function to select whether the copier will stop when the count limit is reached, or
if the copier will complete the copy job before stopping when reaching maximum copy
count.
Setting options: Immediately, After job, Warning
Default setting: After job
Key Operator Mode screen
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password,
then touch " OK " to display the Key Operator Mode screen.
Advice
If an invalid key operator password is entered, coutinue by entering the valid 4-digit
password.
2. Touch "
4. E.K.C. ". Enter an 8-digit EKC master key code, then touch " OK " to display
the EKC Setting Menu screen.
Advice
If an invalid EKC master key code is entered, continue by entering the valid 8-digit
code.
3. Touch "
5. Copy Limit Reached effect " to display the Copy Limit Reached Effect
screen.
4. Select setting option:
Touch " Immediately " to stop the copier when the copy limit is reached.
In this case, the paper in process will be completed, and Enter EKC password will
display after the copier stops.
Touch " After job " to stop the copier after the current job is completed, when copy
limit is reached.
Touch " Warning " to stop the copier but to display the copy limit reached.
5. Touch "
OK " to complete settings and return to the EKC Setting Menu screen.
6. If no further changes are required, proceed to step 9 .
7. If other EKC setting changes are required, touch desired key from
8. If no other EKC settings are required, touch "
Mode screen.
9. Turn power OFF.
10. Turn the copier power switch back ON to perform copying operations.
5. EKC (Electronic Key Counter) [4] (continued)
EKC Setting Menu screen
RETURN " to restore the Key Operator
Copy Limit Reached Effect screen
[1] ~ [5] .
Key Operator
Mode
11 - 27