Konica Minolta 7033 Instruction Manual page 93

Section 7 : Other Basic Functions
v Scan Original(s)
Touch " SCAN " on the Basic screen. The copier starts scanning the set original.
Having Problems?
The copier may not start scanning in some copying conditions. In this case, confirm
that the " Store Mode
touch "
Store Mode
b Store in Memory
Repeat steps c to v.
The remaining memory will be displayed on the Memory indicator in the upper right
position of the Basic screen.
Having Problems?
The memory may be fully loaded to cause overflow during scanning. See p. 12-4 to p.
12-5.
Please Be Reminded!
DO NOT press the STOP/CLEAR button. Stored image will be cleared.
To delete the scanned data without printing, press the STOP/CLEAR button.
To delete the data and reset the copying conditions to the initial setting, press the
STOP/CLEAR and AUTO RESET buttons in order.
7 - 6
Basic screen
" key on the Application Selection screen is highlighted. If not,
" to highlight it.
Basic screen
1. Store Mode (continued)
Memory indicator