Konica Minolta 7033 Instruction Manual page 196

Section 9 : Special Copying: Copy Image
x Enter Print Quantity
Press the Ten keys to set the desired print quantity.
To change the entered quantity, press CLEAR QTY. button and enter the correct quantity.
Please Be Reminded!
DO NOT press STOP/CLEAR button when changing the print quantity. Stored image
will be cleared. Do not press the AUTO RESET button as this will clear all the copier
settings.
Operation panel
ELP
ON
ORY
ET
c Place Original(s) on the platen glass ...FACE DOWN
1. Open the RADF.
2. Place the original on the platen glass.
Please Be Reminded!
DO NOT close the RADF.
Having Problems?
Auto layout may not operate properly if the lighting in the work place is directly over the
platen glass. In this case, consult your Service Centre about an appropriate place for
installation.
Supplement 1: Using Platen store mode
To use Platen store mode, see p. 7-2 to 7-10 for details.
Supplement 2: Checking copying conditions/printed copies
1. Press the CHECK button to display the Check screen.
2. Check the current copying conditions on the Check screen.
3. Touch "PROOF COPY" key on the Check screen to make a proof copy.
When completed, touch " EXIT " key to return to the Basic screen.
See p. 7-22 to p. 7-27 for details.
DATA ERROR
POWE
ON
1 2 3
INTE
4 5 6
STOP
7 8 9
0
P
CLEAR QTY. STAR
5. Auto Layout (continued)
Basic screen
Auto Layout
9 - 21