Ekc On/Off Setting [4] - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

EKC On/Off Setting [4]

Use this function to turn EKC ON or OFF.
Advice
If EKC OFF is selected while EKC functions, the copier will be enabled to perform
copying job without an EKC password entered, and both copy count and copy limit
functions will be discontinued.
Default setting: EKC on
Key Operator Mode screen
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password,
then touch " OK " to display the Key Operator Mode screen.
Advice
If an invalid key operator password is entered, coutinue by entering the valid 4-digit
password.
2. Touch "4. E.K.C.". Enter an 8-digit EKC master key code, then touch "
the EKC Setting Menu screen.
Advice
If an invalid EKC master key code is entered, continue by entering the valid 8-digit
code.
3. Touch "
4. EKC On/Off Setting " to display the EKC On/Off Setting screen.
4. Touch "
ON " to activate EKC or touch " OFF " to de-activate EKC.
The selected key will be highlighted.
5. Touch "
OK " to complete settings and return to the EKC Setting Menu screen.
6. If no further changes are required, proceed to step 9 .
7. If other EKC setting changes are required, touch desired key from
8. If no other EKC settings are required, touch "
Mode screen.
9. Turn power OFF.
10. Turn the copier power switch back ON to perform copying operations.
11 - 26
5. EKC (Electronic Key Counter) [4] (continued)
EKC Setting Menu screen
RETURN " to restore the Key Operator
EKC On/Off Settingscreen
OK " to display
[1] ~ [5] .