Key Operator Data [8] - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

9. Key Operator Data [8]

Use this screen to enter the extension number of the key operator indicated on the Basic
Help screen.
Setting options: 6-digit key operator telephone extension
Max. 20 character key operator name
Key Operator Mode screen
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password,
then touch " OK " to display the Key Operator Mode screen.
Advice
If an invalid Key operator password is entered, continue by entering the valid 4-digit
password.
2. Touch "
8. Key ope. Data " to display the Key Operator Data Input screen.
3. Touch "
Name " to display the Name Input screen.
Input desired name according to the procedure below.
(1) Max. 20 characters can be entered.
(2) Touch Upper arrow and
input uppercase and lowercase letters and symbols.
(3) Touch " DEL. " key to delete the input character from the last.
(4) Touching "C ANCEL " on the Name Input screen will clear all the input characters.
(5) To change the existing name, touch "DEL." key to delete it and enter the new
name.
4. Touch "
OK " on the Name Input screen to return to the Key Operator Data Input
screen.
5. Touch "For Assistance".
Enter an extension number up to 8 digits from the keypad on the operation panel.
The hyphen will be indicated as a space in the Basic Help screen.
If less than 6 digits are entered, the screen will not change when " OK " is touched.
Advice
If an invalid extension number is entered, continue by entering the valid 8-digit number.
6. Touch "
OK " to complete the setting and return to the Key Operator Mode screen.
7. Turn power OFF.
8. Turn the copier power switch back ON to perform copying operations.
Key Operator Data Input screen
Lower arrow keys on the Name Input screen to
9. Key Operator Data [8]
Name Input screen
Key Operator
Mode
11 - 31