Konica Minolta 7033 Instruction Manual page 56

Section 6 : Basic Copying on Basic Screen
For a copier with the Finisher:
Operation panel
The default setting is the Non-sort mode discharged on the TRAY 2 (Finisher middle
exit tray).
Advice: Sort/Group mode of a copier with the Finisher
Use the Sort mode to output multiple copies of the originals and to have each finished set
offset by 30 mm upon exit.
Use the Group mode to group together multiple copies of each original and offset the
finished sets by 30 mm upon exit.
Non-sort mode will not offset the finished sets.
Select the desired mode using the Output screen. See p. 10-2 for details.
v Enter Print Quantity
Press the Keypad to enter the number of copies required. The entered quantity will be
displayed on the upper right position of the Basic screen.
To change the print quantity, press the CLEAR QTY. button and enter the correct
quantity.
Please Be Reminded!
Do not press the STOP/CLEAR button. The image stored in the memory will be cleared.
Do not press the AUTO RESET button as this will clear all the copier settings.
Operation panel
DATA
HELP
1
E
4
TION
7
ORY
P
SET
OUT PUT
ERROR
POWER
ON /
2 3
INTER
5 6
STOP /
8 9
0
CLEAR QTY. START
2. Basic Operation for Copying (continued)
Output screen (Copier with Finisher)
Basic screen
Basic
Operation
6 - 7