Konica Minolta 7033 Instruction Manual page 111

Section 7 : Other Basic Copying
b Make a Proof Copy
1. Press the CHECK button on the Operation panel to display the Check screen.
2. Touch "
PROOF COPY ".
A set of sample copy will be output.
Advice
To stop printing the sample copy, press the STOP/CLEAR button. The Check screen
will be restored. In this case, the scanned image data will not be cleared.
Having Problems?
When Group is selected on the operation panel as the Output mode, Proof copy cannot
be operated.
Having Problems?
The memory may be fully loaded to cause overflow during scanning. See p. 12-4 to p.
12-5.
To start printing after verifying the sample copy, proceed to ,.
To change any settings, proceed to n.
n Change Settings after Proof Copy
After Proof copy, the " " mark will be displayed on the Check Screen. You may change
the selection with " " mark indicated on the left.
Check screen
7 - 24
Check screen
Basic screen
4. CHECK Button (continued)