Konica Minolta 7033 Instruction Manual page 72

Section 6 : Basic Copying on Basic Screen
b b b b b Store Data into Memory
Repeat steps c and v.
The memory remaining will be displayed on the memory indicator in the upper right
portion of the Basic screen.
Please Be Reminded!
DO NOT press the STOP/CLEAR button when changing the print quantity. Stored
image will be cleared.
To delete the scanned data without printing, press the STOP/CLEAR button.
To reset the copying conditions to the initial setting, press the STOP/CLEAR button
then AUTO RESET button.
Supplement: Checking copying conditions/printed copies
1. Press the CHECK button to display the Check screen.
2. Check the current copying conditions on the Check screen.
3. Touch "
PROOF COPY " on the Check screen to make a proof copy.
When completed, touch " EXIT " to return to the Basic screen.
See p. 7-22 to p. 7-27 for details.
n Start Copying
Press the START PRINT button. All scanned images are
copied in succession.
To stop copying, press the STOP/CLEAR button. Memory
settings will be cleared.
After completion of copying, all memory settings are
cleared. Press the AUTO RESET button to return to the
initial condition.
Basic screen
3. Copy Mode (continued)
Memory indicator
ERROR
POWER SAVER
ON / OFF
2 3
INTERRUPT
5 6
STOP / CLEAR
8 9
0
CLEAR QTY. START PRINT
6 - 23
Copy Mode