Konica Minolta 7033 Instruction Manual page 61

Section 6 : Basic Copying on Basic Screen
Procedure
z Set Copy Conditions
1. Close the RADF securely and press the AUTO RESET button on the operation
panel to set the RADF mode.
2. Touch "
COPY MODE " on the Basic screen to display the Copy Mode screen.
3. Touch "
1-2 ". The " 1-2 " key will be highlighted, then touch " OK " to return to the Basic
screen.
Advice
To return to the original condition set before change, touch "
Basic screen
4. As required, set the other copying conditions.
x Enter Print Quantity
Press the Ten keys to set the desired print quantity.
Enter the desired number of copied set, using the Ten keys on the Operation panel. To
change the print quantity, press the CLEAR QTY. button and enter the correct quantity.
Please Be Reminded!
DO NOT press the STOP/CLEAR button when changing the print quantity. Stored
image will be cleared. Do not press the AUTO RESET button as this will clear all the
copier settings.
Operation panel
DATA
HELP
1
E
4
TION
7
ORY
P
SET
6 - 12
Copy Mode screen
ERROR
POWER
ON /
2 3
INTER
5 6
STOP /
8 9
0
CLEAR QTY. START
3. Copy Mode (continued)
CANCEL
Basic screen
".