Konica Minolta 7033 Instruction Manual page 55

Section 6 : Basic Copying on Basic Screen
The standard copying conditions are set as follows.
When an original is set on the platen glass with RADF opened, RADF mode is turned
off.
For copying under your desired conditions, see the description of each operation given
later.
Advice for minimizing toner consumption
• Frame/Fold erasure allows you to obtain copies with less black shading around the
edges, and at the centre, from a thick original such as a book. For Frame/Fold
erasure, see p. 9-15 to p. 9-18.
• When copying thick originals such as books, use Non-image area erase to minimize
toner usage. See p. 9-36 to p. 9-39.
c Select Output Mode
Press the OUTPUT button to display the Output screen.
Operation panel
For a copier without the Finisher:
The default setting is the Sort mode without E-sort and Face up.
Advice: E-Sort Exit
This mode rotates every second finished set by 90 upon exit to the tray, only when
either combination of A4 and A4R, B5 and B5R, or 8.5"x11" and 8.5"x11"R size copy
paper is loaded into separate trays including the Multi-sheet bypass tray.
See p. 7-40 to p. 7-41 for details.
Advice: Face UP Exit
In the Face Up exit, the copies exit to the exit tray in the reverse order, with simplex
sheets and odd numbered duplex sheets face up.
1. To select Sort with E-sort exit, touch " E-Sort ".
To select Group with normal exit, touch " GROUP ".
To select Group with E-sort exit, touch " E-Sort " and
" GROUP ".
To select Face Up, touch " FaceUp ".
2. When copying onto the large-sized copy paper, withdraw
the left edge of the paper exit tray.
6 - 6
OUT PUT
2. Basic Operation for Copying (continued)
Output screen (Copier without Finisher)