Konica Minolta 7033 Instruction Manual page 169

Section 8 : Special Copying : Page Editing
v Place/Scan Original(s) on the Platen Glass...FACE DOWN
1. Open the RADF.
2. Place the original on the platen glass.
When selecting "front cover + facing pages", first place the front cover, and then
place the originals in regular order of pagination.
When selecting "front/back + facing pages", first place the front cover and back cover
in order, and then place the originals in regular order of pagination.
"front cover + facing pages"
"front/back + facing pages"
Please Be Reminded!
• Place and scan the originals in order of pagination.
• The Non image area erase is automatically selected. DO NOT close the RADF.
3. Touch the " SCAN " key on the Basic screen.
Repeat steps 1. to 3.
Having Problems?
The memory may be fully loaded to cause overflow during scanning. See p. 12-4 to p.
12-5.
b Start Copying
Press the START PRINT button. All scanned images are
copied in succession.
To stop copying, press the STOP/CLEAR button. Scanned
data in the memory will be cleared.
After completion of copying, all the data in the memory will
be cleared.
8 - 42
Scan from
SURVEYOR'S
REPORT
first page
SURVEYOR'S
REPORT
Basic screen
8. Dual Page (continued)
10
8 9
6 7
4 5
2 3
1
SURVEYOR'S
REPORT
Copies
Scan from
SURVEYOR'S
SURVEYOR'S
REPORT
REPORT
first page
ERROR
POWER SAVER
2 3
INTERRUPT
5 6
STOP / CLEAR
8 9
0
CLEAR QTY. START PRINT
10
8 9
6 7
4 5
2 3
1
Copies
ON / OFF