Konica Minolta 7033 Instruction Manual page 100

Section 7 : Other Basic Functions
c Scan Originals of Reserve Job
1. Position original(s) FACE UP in the RADF or FACE DOWN on the platen glass
after the copier completes to scan original(s) of the present output job. The message
"Ready to copy" will be displayed on the Basic screen.
2. Press the START PRINT button. The copier starts scanning the original(s) of the
reserve job.
Advice: Reserve Job of Sheet/Cover Insertion
When Sheet/Cover Insertion is selected in reserve job setting, the following message
may be displayed in the message area. Load the copy paper specified in the message
after the present output job is completed.
Please load size ** paper
in any tray except tray #
Advice: Reserve Job and APS
The following message may be displayed in the message area during the reserve job
setting due to the APS being activated. Load the copy paper specified in the message
after the present output job is completed.
Please load size ** paper
in any tray except tray #
3. When the originals of the reserve job are all scanned, the Basic screen of the
" SETTING " folder will be restored automatically, displaying the current condition of
the present output job.
Having Problems?
When any trouble such as paper jam or paper out during the reserve job setting, the
"SETTING" folder key on the Basic screen for the reserve setting will change to "JAM"
or "ADD PAPER" folder key. See p. 6-36 for troubleshooting.
v Set Another Reserve Job
Repeat steps x and c.
Up to 4 reserve job are available to be set at a time.
b Start Next Reserve Job
When present output job is completed with any reserve job set, the Basic screen will
display the copying conditions of the next reserve job, and the output of the next reserve
job will start automatically.
Advice
You can still continue to set copying conditions or to scan for another reserve job when
present output job is completed.
2. Reserve Mode and Job List (continued)
Reserve/
Job List
7 - 13