Konica Minolta 7033 Instruction Manual page 174

Section 8 : Special Copying : Page Editing
c Place Original(s) on RADF...FACE UP
1. Close the RADF securely.
2. Put originals in order of pagination.
Set the A3 and B4 size originals in lengthwise feed (
available in either direction.
3. Place originals FACE UP, aligning to the back left corner of the RADF.
4. Align the original guides to originals.
Supplement 1: Using Store mode
RADF store mode:
To copy a set of more than 50 originals, use RADF store mode. Touch and highlight the
" Store Mode " key on the Application Selection screen. See p. 7-8 to p. 7-10 for details.
Please Be Reminded!
Divide the originals into blocks not exceeding 50 sheets and load them from the block
with the first page.
Platen store mode:
To copy originals that cannot be fed through the RADF, use Platen store mode. Touch
and highlight the " Store Mode " key on the Application Selection screen. See p. 7-4 to p.
7-7 for details.
Supplement 2: Checking copying conditions/printed copies
1. Press the CHECK button to display the Check screen.
2. Check the current copying conditions on the Check screen.
3. Touch "
PROOF COPY " key on the Check screen to make a proof copy.
When completed, touch " EXIT " key to return to the Basic screen.
See p. 7-22 to p. 7-27 for details.
Align originals to the back left corner.
9. Mixed Original (continued)
) direction. The others are
8 - 47
Mixed Original