Vertical/Horizontal Zoom - Konica Minolta 7033 Instruction Manual

Section 6 : Basic Copying on Basic Screen

Vertical/Horizontal Zoom

Use the Vertical/Horizontal zoom mode to reduce or enlarge vertical and horizontal
dimensions, independently.
Incompatible with Vertical/Horizontal zoom
Change magnification
APS
AMS
Vertical ratio: 0.25 ~ 4.00
Horizontal ratio: 0.25 ~ 4.00
Advice
In the case of the Very high mode, Zoom ratio can be set
from 0.50 to 4.00.
The figure shown below is the sample image using the Vertical/Horizontal zoom.
Length: 0.50, Width: 0.50
Length: 1.00, Width: 0.50
Length: 2.00, Width: 0.50
Length: 4.00, Width: 0.50
6 - 30
Length: 0.50, Width: 1.00 Length: 0.50, Width: 2.00
Width
Length: 1.00, Width: 1.00 Length: 1.00, Width: 2.00
Length:2.00, Width: 1.00 Length:2.00, Width: 2.00
Length: 4.00, Width: 1.00 Length: 4.00, Width: 2.00
5. Magnification (continued)
Width
Length: 0.50, Width: 4.00
Length: 1.00, Width: 4.00
Length: 2.00, Width: 4.00
Length: 4.00, Width: 4.00