Figure 1-12 Status Display; Table 1-1 Standard Icons - NEC IT3510 Operation Manual

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Status Display
Ë
While the unit is performing an operation, its status is indicated by icons
located at the bottom of the touch panel. Refer to Figure 1-12 Status
Display. Table 1-1 Standard Icons shows the icons displayed during
normal machine operation. For a complete list of icons used, refer to
Section 1.1 Display Icons in Chapter 8 Troubleshooting on page 8-1.

Figure 1-12 Status Display

Icons
Table 1-1 Standard Icons
Dialing
Dial Wait
Copying
Scanning Now scanning a facsimile page
Receiving
Sending
Icon zone
Description
Now dialing a destination
Waiting to redial a destination
Now copying
Now receiving a facsimile
Now sending a facsimile
Issue 1
1 - 13