NEC IT3510 Operation Manual page 217

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Auto-mode Screen: This display setting is used when both facsimile and copying
functions are used equally.
Refer to Section 4 How to use the Copier and Facsimile (Auto-mode Screen) in
Chapter 1 Getting Started on page 1-24.
Before Starting Operations:
The factory default is the Auto-mode screen.
When the priority screen is changed, the screen switches after executing 'Auto-Reset'.
Setting the Stand-by Screen
1.
Touch [Initial Setting] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen on page 3-12.
2.
Select [Func.], then touch
[Priority Screen].
Issue 1
3 - 23