2-To-1 Transmission - NEC IT3510 Operation Manual

Issue 1
2.8
6 - 16
Timer Transmission (Continued)
4.
Use the 10-key Pad to enter the
desired transmission time, then
touch [Enter].
i
Setting the time:
Touch [Hour] or [Minute], and use the
10-key Pad to enter the time.
The numbers can be cleared by
pressing <C>.
5.
Select the destination.
6.
Press <Start>. The document is
stored into memory and will be
sent at the specified time.

2-TO-1 Transmission

The 2-TO-1 Transmission feature allows the user to send two consecutive
letter-sized pages as a single page.
sending, and will be received and printed as one letter-sized page. This
feature is convenient for saving telephone line charges (only one page is
being sent), as well as saving consumables on the recipient's end (i.e. less
toner and paper are used).
Before Starting Operations:
Only the Automatic Document Feeder can be used to scan documents for the 2-TO-1
feature.
Only letter-sized documents can be used.
The letter paper must be inserted into the ADF in the portrait direction.
The 2-TO-1 Transmission feature is reset after each transmission.
The two pages are reduced before
Advanced Sending and Receiving Operations
NEC IT Series