Hole Punching - NEC IT3510 Operation Manual

NEC IT Series
2.3
NEC IT3510/IT2510 Operations Manual
Points to Note When Stapling
It is recommended to sort up to the following number of sets of copies,
otherwise the copies may become unsorted or fall from the Finisher bin slots.
Refer to Table 2-4 Stapled Number of Pages Per Copied Set.
Table 2-4
# Sheets to
be Stapled
2
3 to 5
6 to 10
11 to 20
21 to 30
31 to 40
41 to 50

Hole Punching

The printed copies can be 3-hole punched for convenience and filing.
Before Starting Operations:
The optional Multi-staple Finisher or Mail-bin Finisher is required to use this function.
The hole punching position can be changed in accordance with the original document
and the direction of the copy paper.
Do not use this function with thick paper or OHP sheets. (Mail-bin Finisher)
Do not use this function with OHP sheets. (Multi-staple Finisher)
Hole Punching
1.
Place the document in the unit.
For more information, refer to
Section 5 Handling Documents in
Chapter 1 on page 1-25.
Stapled Number of Pages Per Copied Set
When
Single-staple Multi-staple
Finisher is Finisher is
Installed Installed
Number of Sets Accumulated
100 sets 100 sets
80 sets 80 sets
60 sets 60 sets
40 sets 40 sets
33 sets 40 sets
— 40 sets
— 40 sets
When
When Mail-bin
Finisher is Installed
200 sets
150 sets
100 sets
50 sets
33 sets
25 sets
20 sets
Issue 1
2 - 29