NEC IT3510 Operation Manual page 279

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Transmission Settings (Continued)
5. Select [TX Set 2], then
touch [Password TX].
6. Select [ON] or [OFF] for
the password
transmission, then touch
[Enter].
7. Select [TX Set 2], then
touch [TX Marker].
8. Touch the key for the
marking position default
setting, then touch
[Enter].
i
[TX Marker] is displayed
only when the optional
TX Marker is installed.
4.
Select [TX Set 3], and touch
[Relay-station Print].
Refer to Section 2.10
Using the TX Marker in
Chapter 6 Advanced
Sending and Receiving
Operations on page
6-19.
Issue 1
4 - 5