Selecting The Zoom Ratio - NEC IT3510 Operation Manual

Issue 1
1.7
2 - 14
The zoom ratio can be selected by the following methods: (Continued)
• X/Y Zoom
• Zoom Memory Input

Selecting the Zoom Ratio

The zoom ratio can be selected by the operator. Automatic zoom adjustment
is available, as well as manually setting the zoom for precise reduction or
enlargement.
Selecting the Zoom Ratio
1.
Load the document in the ADF
or the Book Scanner.
For more information, refer to
Section 5 Handling Documents in
Chapter 1 on page 1-25.
2.
Press <COPY>.
3.
Select [Basics] and touch
[Zoom].
The X and Y zoom ratio can be set for the
document's length and width.
Up to two, most frequently used zoom
ratios can be registered.
NEC IT Series
Copy Operations