Using Program Dialing Keys - NEC IT3510 Operation Manual

Issue 1
2.8
5 - 10
Using Abbreviated Dialing (Continued)
4.
Touch [Abbr.#] and use the 10-
key Pad to enter the three-digit
Abbreviated Dialing number.
i
How to make a selection:
Use [#000] to [#400] and [ ] [ ] to find
the desired number, then touch that
key. The 10-key Pad can be used to
enter Abbr. numbers (000~499) after
touching [#] on the 10-key Dialing
screen.
5.
Press <Start>. Transmission
now begins.

Using Program Dialing Keys

Various functions can be registered as program keys for convenience and
efficient operations. Items such as Serial Broadcasting, Timer Transmission,
and 2-TO-1 Transmission can all be registered in advance, and the operation
is then as simple as touching a single key.
Before Starting Operations:
The functions and destination information must be registered in advance. Up to 30
keys can be registered as Program Dialing keys. The total number of One-Touch keys
and Program Dialing keys cannot exceed 300.
For more information, refer to Section 2.19 Registering Program Keys in Chapter 3
Registration and Setting Operations on page 3-67.
Using Program Dialing Keys
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
Basic Sending and Receiving Operations
NEC IT Series