NEC IT3510 Operation Manual page 278

Issue 1
4 - 4
Transmission Settings (Continued)
5. Select [TX Set 1], and
touch [Com. Mode].
6. Select the G3 Port to be
used as the default port,
then touch [Enter].
i
[Com. Mode] is
displayed only when the
optional 2nd G3 Port is
installed.
3.
TX Set 2 Menu selections:
1. Select [TX Set 2], then
touch [TX].
2. Select the key for the
transmission mode to be
set as the default value,
then touch [Enter].
3. Select [TX Set 2], then
touch [TSI].
4. Select the key for the
default position of the
TSI on the document,
then touch [Enter].
The TSI is required on all
facsimile transmissions.
It is illegal to turn off this
feature.
Advanced Registration and Setting Operations
NEC IT Series