Using One-Touch Dialing - NEC IT3510 Operation Manual

NEC IT Series
2.6
NEC IT3510/IT2510 Operations Manual
If either the [Re-TX] key or the [Dest. Chng] key is displayed on the
Ë
touch panel, re-transmission is possible without the need of re-scanning.
To send to the same destination, touch [Re-TX]. To send to a different
destination, touch [Dest. Chng].

Using One-Touch Dialing

If the destination's facsimile number is registered in advance, the desired
number can be selected by just pressing the appropriate One-Touch key.
Before Starting Operations:
The destination's number must be registered in advance. Refer to Section 2.16
Registering One-Touch Keys in Chapter 3 Registration and Setting Operations on
page 3-50.
If One-Touch keys are categorized into branch offices, regions such as the United
States and International, or as customers/clients, etc., it is easier to keep track by
entering the One-Touch keys into Index keys. Refer to Section 2.18 Registering an
Index for One-Touch Keys in Chapter 3 Registration and Setting Operations on page
3-66.
Using One-Touch Keys
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
Issue 1
5 - 7