Polling Transmission - NEC IT3510 Operation Manual

NEC IT Series
2.16
NEC IT3510/IT2510 Operations Manual

Polling Transmission

This feature allows the receiving side to
automatically request
documents stored into the memory of the
sending side.
Before Starting Operations:
The document stored in memory is deleted
after it is transmitted.
Polling Transmission is not available if the
memory is full.
Only one document can be selected for Polling
Transmission. This feature cannot be used if
there is another document already selected to
be sent.
The feature is reset after each transmission.
Polling Transmission
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
3.
Select [Appl.] from [FAX Menu],
then touch [Polling TX].
transmission of
Issue 1
6 - 27