NEC IT3510 Operation Manual page 283

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Reception Settings (Continued)
2.
Setting the reception
functions:
1. Select [RX 1], then touch
[Reception Mode].
2. Select the reception
mode to be set as the
initial value, then touch
[Enter].
i
To select:
[Auto] - Touch this to set the
Automatic Reception m ode.
[Manual] - Touch this to set the
Manual Reception mode.
3.
Set the number of rings before
Automatic Reception takes
place:
1. Select [RX 1], then touch
[No.of RX Call Rings].
2. Use the 10-key Pad to
enter the number of
times the telephone is to
ring before activating the
Automatic Reception
function, then touch
[Enter].
i
Selections are 1~ 9
rings.
Issue 1
4 - 9