Password Transmission - NEC IT3510 Operation Manual

Issue 1
2.15
6 - 26

Password Transmission

Password Transmission is used to make certain that important documents can
only be sent to the proper recipient station. A 2-digit password is registered is
registered in both the sending and receiving facsimile units. If the passwords
match, the document is sent successfully; however, if the passwords do not
match on both sides, the communication fails.
Before Starting Operations:
The same password must be registered at both sending and receiving sides. Refer to
Section 2.11 Registering Passwords for Secured Communications in Chapter 3
Registration and Setting Operations on page 3-31.
This feature may not work on all manufacturer's units installed at the receiving end.
Password Transmission
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
3.
Select [Set 2] from [FAX Menu],
the touch [Password TX].
4.
Select the destination.
5.
Press <Start>. Transmission
now begins.
Advanced Sending and Receiving Operations
NEC IT Series