NEC IT3510 Operation Manual page 427

NEC IT Series
Your account has
reached its maximum
copy allowance.
Please contact the
administrator.
The selected copy job
will exceed the
maximum copy
allowance. The job
cannot be processed.
Contact the
administrator.
Toner is running low.
Please add toner.
It is time to replace the
drum.
The imaging unit needs
to be changed.
Install the imaging unit.
The Exit Tray has
reached its capacity.
Please remove all
copies from
section tray.
Image data has caused
a memory overflow.
You copy job has been
canceled.
NEC IT3510/IT2510 Operations Manual
Table 8-2 Alarm Messages (Continued)
Messages
The number of copies
made has reached
the maximum value
set by the
administrator.
Copying is impossible
because the
accumulated number
of pages copied has
reached the
maximum set by the
administrator.
The toner supply is
running low.
The toner has run
out.
The life of the drum is
exhausted.
The life of the drum is
exhausted.
The imaging unit
(drum) is not
installed.
The document tray is
full of printed pages.
Memory is full.
Causes
Ask the administrator to clear
accumulated number of pages
copied.
Ask the administrator to change
the setting for the maximum
number of copied pages.
Retry copying after resetting the
mode.
Ask the administrator to clear
the number of accumulated
number of copied pages.
Replace the toner bottle.
Replace the toner bottle.
Replace the imaging unit.
Replace the imaging unit.
Install the imaging unit.
Remove the paper from the Exit
Tray.
Retry copying after reducing the
number of pages.
Print out any documents waiting
to be printed. This will free up
memory space.
Issue 1
Countermeasure
8 - 3