NEC IT3510 Operation Manual page 263

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Registering the Transmission Program (Continued)
4.
Enter the program name to be
displayed on the program key,
then touch [Next].
Refer to Section 1.5 Entering
Characters for Registration on
page 3-5.
5.
Select [TX] and touch [Next].
6.
Select the destination.
i
Using a One-Touch key:
Touch [One-Touch], touch the one-
touch key for the destination, and touch
[Enter].
i
Using Abbreviated Dialing:
Touch [Abbr.#] to select the destination.
Touch [Enter]
destination.
i
Using Serial Broadcast
Transmission:
Select all destinations to be sent.
i
When the destination is not
registered:
Touch [No dest.].
7.
Touch [Next].
after selecting the
Issue 1
3 - 69