Using The Registered Zoom Ratio For Copying; Zoom Ratio Reset; Adjusting The Density For Copying - NEC IT3510 Operation Manual

Issue 1
1.10
1.11
1.12
2 - 18

Using the Registered Zoom Ratio for Copying

A pre-registered zoom ratio can be executed at the touch of a key. This is
useful when regular zoom amounts are used in copying jobs.
Using the Registered Zoom Ratio for Copying
1.
Touch [Custom Zoom].
2.
Select [1], [2], and touch
[Enter].
i
To Select:
The zoom ratio that has been
registered on [1] or [2] is set.
3.
Press <Start>. Copying will now
begin.

Zoom Ratio Reset

The zoom ratio selection is reset to the default setting by touching
<Panel Reset>. If the machine sits idle, the zoom ratio selection will also be
reset after a period of time set by the user. For more details, refer to Section
2.4 Copy Settings in Chapter 4 on page 4-19.

Adjusting the Density for Copying

The density can be adjusted to suit the contrast of the text and the background
of the document being copied. For example, if the document is printed on
dark colored paper, the density can be adjusted to print the text clearly.
Before Starting Operations:
Density can be adjusted by the following methods:
• Automatic density - Determines the density of the document and automatically
• Manual density -
selects the optimal density for copying.
Allows the user to manually select the density according to
their needs.
NEC IT Series
Copy Operations