Repeated Copying On A Single Sheet - NEC IT3510 Operation Manual

Issue 1
2.13
2 - 62
Erase Mode (Continued)
4.
Touch arrow to set the erased
L
position. Choices are: Left Edge
erase, Top Edge erase, or
Frame erase.
5.
Touch [ L ] or [
the width to be erased, then
touch [Enter].
i
To Select:
Figures ranging from 1/4 to 3/4 inch (5
to 20 mm) can be set.
Every time [
M
value is decreased by 1/16 inch (1 mm).
Every time [ L
value is increased by 1/16 inch (1 mm).
i
The width to be erased is in
accordance to the original
document's dimensions.
Therefore, care must be taken
when enlarging or reducing the
image so that no information is
lost or distorted.
6.
Press <Start>. Copying will now
begin.

Repeated Copying on a Single Sheet

One sheet of a document can be repeatedly copied onto one sheet of copy
paper.
M ] arrow to select
] arrow is touched, the set
] arrow is touched, the set
NEC IT Series
Copy Operations